Blue Ceramic Disc Capacitor 220pF 1000V Y5V P5mm For Transformer
High voltage ceramic capacitors is to belong to a kind of ceramic
capacitors, are used to high dielectric constant of ceramics
(barium titanate - titanium oxide) squeezed into a circular tube,
the wafer or disk as a medium, coated metallic film (usually in the
form of silver electrode through high heat sintering, tin copper
clad steel wire, surface coating to protect the enamel, or with
epoxy resin coating. The shape is blue wafer shape. Generally used
in power systems, such as power system metering, energy storage,
partial voltage and other products will use high voltage ceramic
capacitors.
Features
High pressure resistance, low loss
Good frequency characteristics, with high stability
Special series structure is suitable for high voltage and long-term
reliability
High current climbing rate and suitable for high current loop
non-inductive structure
Insulation resistance, long use time
Applications
High voltage ceramic capacitors are used in high stability
oscillating circuits as circuit capacitors and pad capacitors. And
its main role is to remove high-frequency interference, so it is
suitable for anion products, such as laser, X-ray machine, control
equipment, igniter, transformer, power equipment, electrostatic
spraying and other mechanical and electrical equipment need high
voltage and high frequency.
Key Specifications
- Operating temperature range: -25 to +85 celium degree.
- Working voltage: DC 1, 2,3, 6.3, 10 and 15kV
- Withstanding voltage: 1.5 times of working voltage 1kV <=UR
<=10kVUT = 1. 5UR+500V, UR <=10kV, UT = 1.5UR
- Capacitance: measured at 20 +-2celium degree, with 5Vrms
maximumClass I 1+-0.2MHz and class II 1+-0.2kHz
- Capacitance tolerance: J: +-5%, K: +-10%, M: +-20% and Z: +80%-20%
- Dissipation factor (DF): same condition as the capacitanceSL tgd
<= 0.15%N3300 tgd <= 0.4%Y5P tgd <= 2.5%Z5U
- tgd <= 2.5%Z5V tgd <= 2.5%Bn tgd <= 0.5%Y5R tgd <=
0.35%
- Insulation resistance (IR): with rated voltage 500V test 60
+-5secondsIR >= 10,000MQ
- Temperature characteristic: SLN3300, Y5P, Z5U, Z5V and Y5R
Capacitor Parameters:
| No. | Item | Charateristics | Testing Method (GB 2693-2001 GB／T9322-88) |
| 1 | Outlook and Size | No visible damage and in accordance with the size requirements, see
Table 2 | Visual inspection and gage inspection |
| 2 | Marks | in accordance to No.7 | |
| 3 | Capacitance | Meet tolerance requirement | Testing temperature 25℃, Frequency 1±0.2KHz Voltage 1Vmax |
| 4 | Loss Tangent | Y5P(B)≤250×10-4 BN≤50×10 Y5V(F)≤350×10-4 | Testing method is the same to that for capacitance |
| 5 | Insulation Resistance | RI＞4000MΩ | 500VDC,charging time 60±5S |
| 6 | Withstand Voltage | Between terminal | Without failure | Add voltage 1.5UR+500V to between lead terminals for DC voltage 2S,no arcing and
breakdown, leakage current ＜50mA |
| Coating | Without failure | The two leads are short circuited, the capacitance is placed in a
steel ball with a diameter of 1mm, and the root is exposed for 2mm.
Add 1500V DC voltage between the lead and the steel ball for 5S. |
| 7 | Temperature characteristics | Without adding voltage | Y5P(B),BN:±10％ | Step | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| Adding voltage | Y5P(B),BN:＋10％／－15％ | Temp. ℃ | 20±2 | -25±3 | 20±2 | 85±2 | 85±2 | 20±2 | -25±2 |
| UR | / | / | / | / | Rated | Rated | Rated |
| 8 | Lead strength | No damage | Fix the capacitor and apply force. Apply force of 10N when the lead
diameter is more than 0.5mm and 5N when the lead diameter is less
than 0.5mm. Keep it for 10 ± 1s, and the lead out end bears
secondary bending |
| 9 | Resistance to welding heat | Outlook | No damage | Soldering temperature 245±5℃, time 5±0.5S, The insertion depth is 2.5mm away from the porcelain body, and the
insertion speed is 1s. Measure 24 ± 2h after the test |
| ΔC/C | Y5P(B),BN≤±10％ Y5V(F)≤±20％ |
| 10 | Vibration | Outlook | No damage | Frequency 10～500Hz, amplitude 0.75mm, time 6h, 2h in each
direction, three directions. |
| Capacitance | Meet tolerance requirement |
| 11 | Steady Damp Heat | Outlook | No damage, clear remark |
Time 500＋２４ｈ－０ｈ, temperature 40±2℃, Humidity 90～95%,after testing,resume to room temperature a to Test after 24 hrs. |
| ΔC/C | Y5P(B),BN≤±10％ Y5V(F)≤±30％ |
| Loss tangent | Y5P(B) ≤400×10-4 BN≤150×10-4 Y5V(F)≤700×10-4 |
| Insulation Resistance | ≥1000MΩor RI*CR≥25s which smaller |
| 12 | Durability | Outlook | No damage, clear remark | The temperature is 85 ± 2 ℃, the duration is 1000h, the test is
completed with 1.5 times of rated voltage (DC), and the room
temperature is restored to 24h ± 2H for measurement. |
| ΔC/C | Y5P(B),BN, Y5V(F)≤30% |
| Loss Tangent | Y5P(B)≤400×10-4 BN≤150×10-4 Y5V(F)≤700×10-4 |
| Insulation Resistance | ≥2000MΩ or Ri*CR≥25s which smaller |
| 13 | Lead solderability | Wet the solder at the lead out end and flow freely to show that the
tin coating is good | After the capacitor lead is immersed in 25% alcohol rosin solution,
it is immersed in soldering tin with melting temperature of 260 ± 5
℃ for 2 ± 0.5s, and the immersion depth is 2 ~ 2.5mm away from the
porcelain body |
Remarking
There are clear capacitance value code and voltage
Our series of strong products of capacitors and resistors can be
divided into below types:
★ Ceramic Disc Capacitor( low and high voltage, Y1/Y2 safety )
★ Multilayer Ceramic Capacitor( radial, axial and SMD )
★ Film Capacitor( Mylar, MKT, MKP, X2, CBB60, CBB61, CBB65,
CL21-Box, CBB-BOX, CL20, CBB20, CBB81, etc. )
★ Aluminum Electrolytic Capacitor(SMD, Radial , Axial, Snap-in ,
Screw Terminal, etc. )
★ Tantalum Capacitor(SMD, Radial , Axial )
★ Super Capacitor( Coin Type, Cylindrical Type, Module Type)
★ Mica Capacitor
★ Trimmer Capacitor
★ SMD Resistors
★DIP TYPE Resistors( KNP, CF, MF, MOF, ect,)
★ Cement Resistors
★ Leadless Resistors( MLEF)
★Power Resistor
Any more details, kindly contact us freely!
